![]() I can tweak my design to accommodate this higher volume number but I don't think it should be labeled a 25 year storm event because the rainfall is so compressed. Then he says that the municipal storm drain will surcharge during this three hour period, activating the valve that prevents backflow into the swale, but which also prevents the site water from draining so the water will build up in the swale and spill over the emergency spillway. I don't think the hydrograph should be used for volume, especially since it compresses the majority of the 5.7 inches of the 25 year type III 24 hour storm into a 3 hour period. I ask because a colleague trying to find fault with the design of a dry swale has used a hydrograph (one that we used to determine peak flow) to calculate volume and say that our dry swale is undersized. To determine the corresponding return period you would need a table of depth vs. You are correct that a 5.7" rainfall over 3 hours will be much more than a 25-year event. Of course, you will need to use the truncated curve with the appropriate 3-hour rainfall depth for your location. On the other hand, if you EXTRACT the middle 3 hours (around the peak) you will accurately preserve the intensity information represented by the original curve. In general, if a storm is designated x-hours, it should be used only for that duration. totals in the Northeast have exceeded 6 inches across eastern Pennsylvania. Only a few specific storms (such as the Illinois Huff distributions) are intended to be used at varying durations. rainfall to much of the Southeast and the lower and middle Atlantic Coast. Severe thunderstorms with heavy rainfall moved through the region Sunday night (June. ![]() This is not an intended use for this rainfall, and the results are not valid. Ames Rainfall Totals Current Conditions for Connecticut: Precipitation. (Assuming the same total depth.) All intensities, including the peak, will be eight times greater. ![]() When you COMPRESS a 24-hour Type III storm to 3 hours, you increase the rainfall intensity 8-fold. For example, Autstin, TX has a complete set of 3-hour rainfall distributions. Anything other then standard 24-hour SCS/NRCS rainfalls is basically a custom distribution, and should be modeled using the specified rainfall table. ![]() Exactly what are you trying to do? If you are trying to model a 3-hour event, your stormwater regulations should provide the necessary rainfall distribution. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |